Rheem Furnace 59 Error Code
What the 59 code means
Water sensed (blocked drain) on Rheem furnaces with the 7-segment diagnostic display. The water level sensor detected condensate backing up, and heating is shut down; repeated events cause a one-hour lockout with code 10.
Likely causes
- clogged condensate drain or trap
- failed condensate pump
- frozen condensate line
- kinked drain hose
How to fix it — step by step
- Check the condensate drain line for clogs, kinks or frozen sections and clear what you can reach safely
- Make sure the condensate pump, if fitted, is powered and emptying
- Turn power off for 30 seconds, then back on, and try one heat call
- If water keeps backing up, stop and call a technician
Parts that commonly fix the 59 code
- condensate pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.