Roborock Robot vacuum Error 22
What this problem usually means
Dock locator error (Q5+ / S7-era manuals: 'Clean and retry'). On S5 Max-era models the same number is listed differently, as 'wipe the recharge sensor', so check your own manual. The robot is having trouble locating / reading the dock.
Likely causes
- Dock locator / recharge sensor window dirty
- Dock location beacon blocked or dock moved
- Bright light or obstacles interfering with the dock signal
How to fix it — step by step
- Wipe the dock locator / recharge sensor on the robot clean
- Clean the dock location beacon / signal area on the dock and make sure nothing blocks it
- Make sure the dock is flat against a wall with clear space in front of it
- Place the robot in front of the dock and retry
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.