Roborock Robot vacuum Error 26

What this problem usually means

Wall sensor dirty (Q5+, S5 Max and older models; the same fault is Error 15 on the S7 series and newer). The side wall sensor cannot read the wall correctly.

Likely causes

  1. Dust or dirt on the wall sensor window
  2. Sensor window smeared with grime

How to fix it — step by step

  1. Find the wall sensor on the side of the robot
  2. Wipe the sensor window clean with a soft, dry cloth
  3. Move the robot to a new location
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →