Roborock Robot vacuum Error 3

What this problem usually means

Wheels suspended. One or both wheels have lost contact with the floor, for example after the robot is picked up, rides up onto something, or a wheel hangs over an edge.

Likely causes

  1. Robot lifted or a wheel hanging off a step or threshold
  2. Robot rode up onto an object and is stranded
  3. Wheel stuck in a raised position by debris

How to fix it — step by step

  1. Pick the robot up and check both wheels press in and spring back
  2. Clear any debris from around the wheels
  3. Place the robot on flat, level floor
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →