Roborock Robot vacuum Error 1

What this problem usually means

LiDAR turret or laser blocked. The laser distance sensor on top of the robot cannot spin or scan freely, so the robot cannot navigate.

Likely causes

  1. Object resting on or jammed under the LiDAR turret
  2. Hair or debris caught around the laser head
  3. Robot wedged under low furniture pressing on the turret

How to fix it — step by step

  1. Remove anything resting on or around the LiDAR turret
  2. Gently rotate the laser head by hand to check it turns freely and clear any debris
  3. Wipe the laser sensor windows clean
  4. Move the robot to an open area and restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →