Roborock Robot vacuum Error 2

What this problem usually means

Bumper stuck. The front bumper is held in a pressed position, so the robot thinks it is constantly colliding with something.

Likely causes

  1. Debris or a small object lodged in the bumper gap
  2. Robot pinned against a wall or furniture
  3. Dirt built up around the bumper / collision sensor

How to fix it — step by step

  1. Clean around the bumper
  2. Lightly tap the bumper several times to dislodge anything jammed inside it
  3. Check the bumper springs back freely when pressed on both sides
  4. Move the robot to a new location and restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →