Roborock Robot vacuum Error 13
What this problem usually means
Charging error. The robot is on or near the dock but is not charging properly.
Likely causes
- Dirty charging contacts on the robot or dock
- Robot not seated correctly on the dock
- Dock not powered or cable not fully connected
How to fix it — step by step
- Clean the charging contacts on both the robot and the dock with a dry cloth
- Check the dock power cable is fully plugged in and the dock indicator is on
- Place the robot squarely on the dock so the contacts meet
- Leave it on the dock and check it starts charging, then retry
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.