Samsung Washer OC Error Code

What the OC code means

Overflow error: there is too much water in the washer. This is the newer form of the older OE overflow code.

Likely causes

  1. Too much detergent causing excess suds and a false level reading
  2. Water inlet valve stuck open
  3. Faulty water level / pressure sensor
  4. Drain hose siphoning or installed incorrectly

How to fix it — step by step

  1. Switch off the power for 1 minute, then switch back on so the drain pump can drain the washer
  2. Turn off the water taps if the tub keeps filling with the washer off
  3. Check the drain hose height and that it is not pushed too far into the standpipe
  4. Use less HE detergent on the next cycle and run an empty rinse

Parts that commonly fix the OC code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →