Samsung Washer PF Error Code
What the PF code means
Power failure / voltage error: power went out, the washer was unplugged, or the breaker tripped before the washer powered itself off. Samsung lists PF in its voltage-error group.
Likely causes
- Irregular or low supply voltage
- Washer on a shared circuit or extension cord
- Power outage / breaker trip during a cycle (PF)
- Washer used on a power grid it was not made for
How to fix it — step by step
- Plug the washer directly into its own wall outlet - do not use an extension cord
- Check the breaker has not tripped and reset it if needed
- Unplug for 1 minute, restore power and start a new programme
- Check the power cord is plugged in properly
Parts that commonly fix the PF code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.