Trane Furnace 6 flashes

What this problem usually means

On Trane single-stage furnaces (XR80, XR90, XR95, XB80, XB90 families) with the integrated furnace control (IFC), the red LED flashes this count: 115 volt AC power reversed or improper ground — line polarity is reversed at the furnace or the ground is poor.

Likely causes

  1. Line and neutral reversed at the furnace or disconnect
  2. Missing or poor earth ground
  3. Recent electrical panel or outlet work

How to fix it — step by step

  1. Check that the furnace breaker is on and the furnace switch is on
  2. Note whether the code appeared right after electrical work in the home
  3. Do not swap wires or open the electrical junction yourself
  4. Call an electrician or HVAC technician to correct polarity and grounding

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace problems

See all Trane furnace codes & guides →