Whirlpool Dishwasher F1 E1 Error Code

What the F1 E1 code means

A control-board fault. On older HE models it means a stuck relay on the electronic control board; on newer models Whirlpool's manual describes it as the dishwasher failing to operate the fill valve correctly, and the drain sequence begins.

Likely causes

  1. Defective main control board / stuck relay
  2. Damaged wiring harness between control and fill valve
  3. Power surge or glitch setting a false fault

How to fix it — step by step

  1. Turn off water to the dishwasher if possible and press Cancel once to silence the alarm
  2. Cut power at the breaker or unplug for 1 minute, then restore power
  3. Run a short cycle and watch whether the code returns
  4. If it returns, stop using the machine and schedule service - the control usually needs replacement

Parts that commonly fix the F1 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →