Whirlpool Dishwasher F3 E3 Error Code
What the F3 E3 code means
The OWI (optical water indicator) sensor failed to calibrate during the cycle.
Likely causes
- Failed or dirty OWI sensor
- Failed drain hose check valve letting water backflow into the tub
- Defective sensor wiring harness
How to fix it — step by step
- Clean the filters and make sure dirty water is draining away fully
- Check the drain hose is not letting sink water run back into the dishwasher
- Cut power for 1 minute, restore it, and run a cycle
- If the code returns, schedule service for the sensor / check valve
Parts that commonly fix the F3 E3 code
- thermistor / owi sensor - Shop at RepairClinic
- drain hose - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.