Whirlpool Dishwasher F6 E4 Error Code

What the F6 E4 code means

The control detected the overfill float switch open - it thinks the dishwasher may be overfilled, often because the float is stuck or the machine is not level.

Likely causes

  1. Float switch stuck up or obstructed by debris
  2. Defective float / overfill switch
  3. Failed water inlet valve letting water in when off, or dishwasher not level

How to fix it — step by step

  1. Check the overfill float in the tub floor moves freely and nothing is wedged under it
  2. Check the dishwasher is level side to side and front to back
  3. Cut power for 1 minute, restore it, and run a cycle
  4. If water enters while the machine is off, turn off the supply and schedule service

Parts that commonly fix the F6 E4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →