Whirlpool Dishwasher F8 E4 Error Code

What the F8 E4 code means

Water detected in the drip tray under the tub: the leak / overfill float switch has tripped, the drain sequence begins and the dishwasher will not run.

Likely causes

  1. Leaking water supply connection, especially after a recent install
  2. Water leaking into the drip tray from a hose or pump seal
  3. Excess suds from regular dish soap overflowing into the tray

How to fix it — step by step

  1. Press Cancel once to silence the alarm; turn off the water supply to the dishwasher if you can and keep the door closed
  2. Empty the drip tray and check the float switch is connected
  3. Check the water connections for leaks and tighten a dripping fitting by hand
  4. Use only dishwasher detergent; if the code returns, schedule service to find the leak

Parts that commonly fix the F8 E4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →