Whirlpool Dishwasher F8 E5 Error Code

What the F8 E5 code means

The fill valve is stuck on / stuck open, so water keeps entering and the dishwasher overfills; the drain sequence begins and operation is prevented.

Likely causes

  1. Water inlet valve stuck open, often from debris in the valve
  2. Defective main control board holding the valve on
  3. Loose or damaged fill valve wiring

How to fix it — step by step

  1. Turn off the water supply to the dishwasher if possible
  2. Press Cancel once to silence the alarm and keep the door closed - do not turn off power if you cannot turn off the water, so the drain pump can run
  3. Do not run the dishwasher again until it has been serviced

Parts that commonly fix the F8 E5 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →