Whirlpool Dishwasher F2 E1 Error Code

What the F2 E1 code means

A stuck key: the control detects a button on the user interface stuck or held for over 30 seconds. On models without a display this shows as 2 flashes, pause, 1 flash of the Clean light.

Likely causes

  1. Stuck or shorted keypad button
  2. Moisture or cleaner getting into the control panel
  3. Defective user interface / control panel

How to fix it — step by step

  1. Dry the control panel and make sure nothing is leaning on the buttons
  2. Press each button once to free a stuck key
  3. Cut power for 1 minute, restore it, and try again
  4. If the code returns, the user interface usually needs replacement - schedule service

Parts that commonly fix the F2 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →