Whirlpool Dishwasher F6 E6 Error Code

What the F6 E6 code means

Incoming water is too cold: the water temperature at fill is below what the control expects (about 120F).

Likely causes

  1. Household hot water set too low or a long run from the water heater
  2. Thermistor / OWI sensor reading incorrectly
  3. Defective sensor wiring harness

How to fix it — step by step

  1. Run the hot tap at the kitchen sink until the water is hot before starting the dishwasher
  2. Check the water heater is set to about 120F
  3. If the code returns with hot water at the sink, schedule service for the sensor

Parts that commonly fix the F6 E6 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →