Whirlpool Dishwasher F8 E1 Error Code

What the F8 E1 code means

Platform-dependent: on older HE models this is a slow drain; on current models 8 flashes, pause, 1 flash is also shown as H2O - no water detected at the dishwasher and the cycle pauses.

Likely causes

  1. Clogged filter, drain hose or drain pump (slow-drain platform)
  2. Water supply off or fill hose kinked (current platform)
  3. Defective drain pump

How to fix it — step by step

  1. Remove and rinse the filters under running water
  2. Check the drain hose for kinks or clogs and clear the sink disposer / air gap
  3. Make sure the water supply is on and the fill hose is not kinked
  4. If the code returns, schedule service

Parts that commonly fix the F8 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →