Whirlpool Washer F8 E1 Error Code

What the F8 E1 code means

Long fill / low water flow: the washer is taking too long to fill or is sensing too little incoming water. Also shown as LF or Lo FL on some models.

Likely causes

  1. Hot or cold faucet not fully open or turned off
  2. Kinked inlet hoses
  3. Clogged inlet valve screens
  4. Low household water pressure
  5. Failed water inlet valve

How to fix it — step by step

  1. Turn on the water and open both hot and cold faucets completely - both must be supplied
  2. Check inlet hoses are not kinked and remove any anti-flood/flood-safe devices in the line
  3. Turn off water, disconnect hoses and clean the inlet screens
  4. Press Pause/Cancel twice and Power once to clear, then restart

Parts that commonly fix the F8 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool washer error codes

See all Whirlpool washer codes & guides →