Goodman Furnace EEn Error Code

What the EEn code means

Igniter open on newer Goodman single-stage furnaces with the alphanumeric display control. The igniter circuit is open, so the furnace cannot light.

Likely causes

  1. burned-out or cracked hot surface igniter
  2. loose or disconnected igniter wiring

How to fix it — step by step

  1. Check the thermostat is set to Heat and the furnace power switch and breaker are on
  2. Confirm the manual gas shutoff valve near the furnace is open (handle parallel to the pipe)
  3. Turn power off for 30 seconds, then back on, and allow one retry cycle
  4. Do not keep resetting a furnace that repeatedly fails to light
  5. If it locks out again, call a licensed HVAC technician and note the code

Parts that commonly fix the EEn code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Goodman furnace error codes

See all Goodman furnace codes & guides →