Kenmore Dryer d80 Error Code

What the d80 code means

Exhaust vent about 80% blocked on Kenmore 796-series (LG-built) dryers: the CHECK VENT system has detected a restriction in the external venting. The code is only displayed for about 2 hours and is a warning, not a dryer failure.

Likely causes

  1. Lint buildup partially blocking the ductwork
  2. Vent run too long or with too many turns
  3. Blocked outside vent hood
  4. Clogged lint screen

How to fix it — step by step

  1. Clean the lint screen
  2. Clean lint from the entire vent run and outside hood
  3. Check the vent run is not crushed, too long or full of sharp turns
  4. Run an empty test cycle and check strong airflow outside

Parts that commonly fix the d80 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →