Kenmore Dryer E1 Error Code
What the E1 code means
Thermistor failure on Kenmore 110-series dryers with electronic controls (Whirlpool-built platform): Sears PartsDirect lists E1 for this platform, and Whirlpool tech sheets for the platform describe E1 as the thermistor circuit open.
Likely causes
- Failed thermistor (temperature sensor)
- Open thermistor wiring
- Loose thermistor connection
How to fix it — step by step
- Unplug the dryer before any check
- Check the thermistor wiring and connections
- Test the thermistor resistance; it should measure about 10,000 ohms at room temperature
- Replace the thermistor if it is defective
Parts that commonly fix the E1 code
- thermistor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.