Kenmore Dryer F:24 Error Code
What the F:24 code means
Inlet thermistor failure on Kenmore Elite dryers (110-series Whirlpool-built platform): the control detects a problem with the inlet temperature sensor, with F:24 listed for the open-circuit condition in service references for this platform.
Likely causes
- Failed inlet thermistor
- Loose or damaged inlet thermistor wiring
- Control board fault if sensor and wiring test good
How to fix it — step by step
- Unplug the dryer before any check
- Check the inlet thermistor wiring connections
- Test the thermistor resistance against the value in your tech sheet (about 10,000 ohms at room temperature on this platform)
- Replace the inlet thermistor if its resistance is out of range
Parts that commonly fix the F:24 code
- thermistor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.