Kenmore Washer FE Error Code

What the FE code means

Water overflow error on Kenmore 796-series (LG-built) front-load washers: the water level is too high.

Likely causes

  1. Water inlet valve stuck open
  2. Water level sensor failure
  3. Too much detergent creating excess suds read as high level

How to fix it — step by step

  1. Turn off the water faucets if the washer keeps filling
  2. Unplug the washer and let it drain or pump out
  3. Restart with less detergent and check the fill stops normally
  4. Call for service if it overfills again, as the inlet valve or level sensor is faulty

Parts that commonly fix the FE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →