Kenmore Washer PE Error Code

What the PE code means

Water level sensor failure on Kenmore 796-series (LG-built) front-load washers: the control cannot read the water level correctly.

Likely causes

  1. Loose or damaged sensor wiring
  2. Blocked or disconnected pressure hose
  3. Failed water level (pressure) sensor

How to fix it — step by step

  1. Unplug the washer for a few minutes, then restart a cycle
  2. Check for obvious hose or wiring damage only if you can do so safely
  3. Restart and watch whether the fill level is normal
  4. Call a technician if PE returns, as the level sensor needs testing or replacement

Parts that commonly fix the PE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →