Kenmore Washer F20 Error Code
What the F20 code means
No water detected entering the machine on Kenmore 110-series (Whirlpool-built) high-efficiency front-load washers. The pressure switch is not tripped after about 6 minutes of trying to fill.
Likely causes
- Water faucets not fully turned on
- Plugged or kinked inlet hoses or clogged inlet screens
- Failed water inlet valve
- Pressure switch hose loose, damaged or a siphon problem if water is in the tub
How to fix it — step by step
- Select PAUSE/CANCEL twice and unplug the washer
- Make sure both faucets are turned on all the way and the inlet hoses are not kinked
- Clean the inlet screens and check for frozen hoses in cold weather
- Plug in, reselect the cycle and press START; call for service if F20 returns
Parts that commonly fix the F20 code
- water inlet valve - Shop at RepairClinic
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.