Kenmore Washer F33 Error Code

What the F33 code means

Pump drive system error on Kenmore 110-series (Whirlpool-built) high-efficiency washers: the connection between the drain pump and the Central Control Unit (CCU) is lost.

Likely causes

  1. Loose wire harness connection at the pump or control board
  2. Damaged pump wiring
  3. Failed drain pump
  4. Failed central control unit

How to fix it — step by step

  1. Unplug the washer or disconnect power
  2. Check the wire harness connections to the pump and to the Central Control Unit and reseat any loose plugs
  3. Plug in and run a diagnostic test or any cycle to verify operation
  4. Call a technician if F33 returns, as the pump or control board needs testing

Parts that commonly fix the F33 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →