Kenmore Washer Sd Error Code

What the Sd code means

Excessive suds on Kenmore 110-series (Whirlpool-built) Oasis top-load washers. The control detects too much foam and runs a suds reduction routine; Sears PartsDirect lists this as Sd or F71 on this platform.

Likely causes

  1. Too much detergent used
  2. Regular or hand-washing detergent used instead of HE detergent
  3. Detergent buildup in the tub

How to fix it — step by step

  1. Use only High Efficiency (HE) detergent in this washer
  2. Measure detergent and use less on the next load
  3. Let the suds reduction routine finish and the foam clear
  4. Run a rinse cycle with no detergent if suds remain

Parts that commonly fix the Sd code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →