Kenmore Washer PF Error Code

What the PF code means

Power failure on Kenmore 796-series (LG-built) front-load washers: power was lost during the cycle, so the cycle may not have completed properly.

Likely causes

  1. House power outage
  2. Tripped breaker or blown fuse
  3. Loose power cord connection

How to fix it — step by step

  1. Check the breaker and that the power cord is firmly plugged in
  2. Wait for stable power if an outage just ended
  3. Start a new cycle, as the interrupted cycle may not finish correctly

Parts that commonly fix the PF code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →