Rheem Furnace 55 Error Code

What the 55 code means

Pressure switch stuck closed when it should be open on Rheem furnaces with the 7-segment diagnostic display. The control will not start the cycle until the switch reads open.

Likely causes

  1. stuck or welded pressure switch contacts
  2. blocked pressure switch hose or port
  3. faulty pressure switch

How to fix it — step by step

  1. Check the thermostat is set to Heat and calling for heat
  2. Check the outdoor vent and intake pipes are clear of snow, ice or debris
  3. On a high-efficiency model, check the condensate drain line and trap are not clogged or frozen
  4. Turn power off at the furnace switch for 30 seconds, then back on, and try one heat call
  5. If the code returns, stop resetting and call a licensed HVAC technician

Parts that commonly fix the 55 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace error codes

See all Rheem furnace codes & guides →