Rheem Furnace 58 Error Code

What the 58 code means

Water sense circuit open on Rheem R95P furnaces with the 7-segment diagnostic display. The water level sensing circuit for the condensate system is open.

Likely causes

  1. disconnected water sensor wiring
  2. failed water level sensor
  3. condensate system fault

How to fix it — step by step

  1. Check the condensate drain line and trap for clogs and clear any visible blockage
  2. Make sure the condensate pump, if fitted, is powered and working
  3. Turn power off for 30 seconds, then back on, and try one heat call
  4. Call a technician if the code returns — sensor wiring is pro work

Parts that commonly fix the 58 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace error codes

See all Rheem furnace codes & guides →