Samsung Washer nF Error Code
What the nF code means
The washer has tried to fill but was unsuccessful - a 'no fill' error. This is an older display form of the newer 4C / older 4E water-supply code.
Likely causes
- Water supply taps closed or only partly open
- Kinked, clogged or frozen inlet hose
- Clogged inlet mesh filter screen
- Low household water pressure
- Failed water inlet valve
How to fix it — step by step
- Make sure both hot and cold taps are fully open
- Straighten the inlet hoses and check they are connected hot-to-hot and cold-to-cold
- Turn off the water, disconnect the hoses and clean the mesh filter screens at the washer inlets
- Check the drain hose is only 6-8 inches into the standpipe so water is not siphoning out
- Unplug the washer for 1 minute, restore power and restart a cycle
Parts that commonly fix the nF code
- water inlet valve - Shop at RepairClinic
- inlet hose - Shop at RepairClinic
- water level sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.