Shark Robot vacuum Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 15 problems covered.
Shop Shark Robot vacuum parts at RepairClinic
- ALL LED LIGHTS are off — Listed in the Shark ION Robot owner's guide error chart: all LED lights are off because the robot is in Sleep Mode, the power switch is…
- BATTERY ICON (RED) flashing — Error number 24 in Shark IQ manuals: the battery is critically low and needs recharging. Shown by the battery icon flashing red.
- CLEAN (BLUE) + ! (RED) flashing — Error number 2 in Shark IQ manuals: blockage in the brushroll. Shown by CLEAN blue and ! red flashing (some models show the brushroll…
- CLEAN (BLUE) + DOCK (RED) flashing — Error number 23 in Shark IQ manuals: check the base / charging placement. The manual's solution is to make sure the base indicator light…
- CLEAN (BLUE) + DOCK (RED) solid — Error number 14 in Shark IQ / EZ manuals: BotBoundary error. The robot is on or too close to a BotBoundary magnetic boundary strip.
- CLEAN (RED) + ! (RED) flashing — Error number 3 in Shark IQ manuals: suction motor failure. In most cases this is a blockage or clogged filter reducing suction rather than…
- CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing — Error number 21 in Shark IQ manuals: the robot has encountered an error while booting. Shown by CLEAN, DOCK and ! flashing (DOCK is white…
- CLEAN (RED) + DOCK (BLUE) alternating — Error number 16 in Shark IQ manuals: the robot is stuck. Shown by CLEAN red and DOCK blue alternating.
- CLEAN (RED) + DOCK (BLUE) flashing — Error number 7 in Shark IQ manuals (shown with DOCK white instead of blue on some newer models): cliff sensor error. The drop sensors are…
- CLEAN (RED) + DOCK (RED) + ! (RED) flashing — Error number 2 in Shark IQ manuals: a drive wheel is stuck (some IQ manuals word the same pattern as the robot being stuck and to check the…
- CLEAN (RED) + DOCK (RED) flashing — Error number 9 in Shark IQ / EZ manuals: the robot dust bin needs to be reinstalled. The robot cannot detect its dust bin correctly.
- CLEAN (RED) flashing — Error number 10 in Shark IQ / EZ manuals: the robot may be stuck on an obstacle and has stopped. Shown by the CLEAN light flashing red.
- CLEAN (WHITE) + DOCK (RED) + ! (RED) flashing — Error number 2 in the Shark AI Robot series manual: wheel motor encoder failure. Unlike the other Error 2 light patterns, the manual's…
- DOCK (RED) + ! (RED) flashing — Error number 2 in Shark IQ / EZ manuals: a side brush is stuck. Shown by the DOCK and ! lights flashing red.
- DOCK (RED) flashing — Error number 6 in Shark IQ / EZ manuals: the front bumper may be jammed. Shown by the DOCK light flashing red on its own.