Shark Robot vacuum CLEAN (RED) + DOCK (RED) + ! (RED) flashing

What this problem usually means

Error number 2 in Shark IQ manuals: a drive wheel is stuck (some IQ manuals word the same pattern as the robot being stuck and to check the bumper). Shown by CLEAN, DOCK and ! all flashing red.

Likely causes

  1. Hair or debris wrapped around a drive wheel or its axle
  2. Wheel jammed by an object
  3. Robot wedged so a wheel cannot turn

How to fix it — step by step

  1. Turn the robot over and clean the wheels
  2. Remove any debris wrapped around the wheel axles so the wheels move freely
  3. Check the front bumper moves in and out freely
  4. Move the robot to a new location and restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Shark robot vacuum problems

See all Shark robot vacuum codes & guides →