Shark Robot vacuum CLEAN (BLUE) + DOCK (RED) flashing
What this problem usually means
Error number 23 in Shark IQ manuals: check the base / charging placement. The manual's solution is to make sure the base indicator light turns blue to confirm the robot is placed on the base correctly.
Likely causes
- Robot not seated correctly on the base / dock
- Base placed unevenly or against clutter so the robot cannot align
- Charging contacts not meeting
How to fix it — step by step
- Check the base is on a level surface with clear space around it
- Pick the robot up and place it on the base squarely
- Make sure the base indicator light turns blue to confirm correct placement
- Leave the robot on the base to charge, then restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Related Shark robot vacuum problems
- CLEAN (BLUE) + DOCK (RED) solid
- CLEAN (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing
- CLEAN (RED) + DOCK (BLUE) alternating
- CLEAN (RED) + DOCK (BLUE) flashing
- CLEAN (RED) + DOCK (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (RED) flashing
- CLEAN (RED) flashing
- CLEAN (WHITE) + DOCK (RED) + ! (RED) flashing
- DOCK (RED) + ! (RED) flashing
- DOCK (RED) flashing
- ALL LED LIGHTS are off