Trane Furnace 4 flashes

What this problem usually means

On Trane single-stage furnaces (XR80, XR90, XR95, XB80, XB90 families) with the integrated furnace control (IFC), the red LED flashes this count: open limit switch — a temperature limit opened because the furnace overheated.

Likely causes

  1. Dirty or clogged air filter restricting airflow
  2. Closed or blocked supply registers and returns
  3. Weak or failed blower motor
  4. Failed limit switch

How to fix it — step by step

  1. Turn the thermostat down and let the furnace cool
  2. Replace the air filter if it is dirty
  3. Open all supply registers and make sure returns are not blocked by furniture
  4. Restore power and call for heat once to see if it runs
  5. If the code repeats, call a technician — repeated limit trips can damage the heat exchanger

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace problems

See all Trane furnace codes & guides →