Carrier Furnace 44 Error Code

What the 44 code means

Blower calibration fault on Carrier variable-speed furnaces such as the 58MVP. The calculated blower speed is below 250 RPM or above 1300 RPM; the furnace defaults to low- or high-heat mode if it can. On the matching owner's diagnostic chart, repeated code 44 can lead to code 12 blower calibration lockout.

Likely causes

  1. Dirty air filter causing excessive static pressure
  2. Closed or blocked registers
  3. Undersized ductwork or excessive duct static pressure
  4. Blower motor or wiring fault (especially if shown with code 41)

How to fix it — step by step

  1. Replace a dirty air filter
  2. Open all supply registers and clear return grilles
  3. Cycle power once at the service switch
  4. If 44 returns or becomes a lockout, call a technician to check duct static pressure and the blower

Parts that commonly fix the 44 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Carrier furnace error codes

See all Carrier furnace codes & guides →