Carrier Furnace 12 Error Code
What the 12 code means
Blower on after power up. On Carrier 58-series furnaces this is normal operation: if power is restored while the thermostat is calling for heat (or the call ends during the blower on-delay), the blower runs for about 90 seconds. It is not a fault.
Likely causes
- Power was interrupted and restored during a call for heat
- The thermostat call ended during the blower on-delay period
How to fix it — step by step
- Wait about 90 seconds - the blower should stop on its own
- Confirm the thermostat is set to Heat and the furnace then runs a normal cycle
- No reset is needed
- If code 12 repeats with no power outages, have a technician check for a loose power connection or failing door switch
Parts that commonly fix the 12 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.