Carrier Furnace 14.3 Error Code
What the 14.3 code means
Flame lost lockout on Carrier furnaces with the 3-digit status display, such as the 58SC0B/58SC1B. The LED flashes major code 14 while the display reads 14.3: the flame signal was lost seven times during a single heat request.
Likely causes
- Incorrect manifold pressure or gas firing rate
- Gas inlet pressure fluctuations
- Flame sensing problem (see codes 34.2-34.3 on display models)
How to fix it — step by step
- Check that the air filter is clean and vents are open
- Note the code for the technician
- Do not repeatedly reset the furnace
- Call a technician - seven flame losses in one call is a combustion fault that must be diagnosed
Parts that commonly fix the 14.3 code
- flame sensor - Shop at RepairClinic
- gas valve - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.