Carrier Furnace 14.2 Error Code

What the 14.2 code means

Flame lost lockout on Carrier furnaces with the 3-digit status display, such as the 58SC0B/58SC1B. The LED flashes major code 14 while the display reads 14.2: the flame signal was lost three times after the heating blower on-delay. The control auto-resets after 3 hours; see code 34.

Likely causes

  1. Incorrect manifold pressure or gas firing rate
  2. Gas inlet pressure fluctuations
  3. Flame sensing problem (dirty or failing flame sensor)

How to fix it — step by step

  1. Check that the air filter is clean and supply and return vents are open
  2. Confirm other gas appliances are working normally
  3. Do not keep resetting the furnace to force it to run
  4. Call a technician to check gas pressure and the flame sensing circuit

Parts that commonly fix the 14.2 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Carrier furnace error codes

See all Carrier furnace codes & guides →