Carrier Furnace 11 Error Code

What the 11 code means

No previous code. On Carrier furnaces with the two-digit LED status code system, code 11 means no fault is stored in the control's memory; stored codes are erased automatically after 72 hours. This is a status indication, not a failure.

Likely causes

  1. Normal operation - no fault has been stored
  2. An older fault aged out after 72 hours or was erased by a power interruption

How to fix it — step by step

  1. No repair is needed for code 11 by itself
  2. Run the furnace through a full heating cycle from the thermostat
  3. If a different code appears during the cycle, note it - that is the active fault
  4. If the furnace misbehaves but only ever shows 11, have a technician watch a live cycle

Parts that commonly fix the 11 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Carrier furnace error codes

See all Carrier furnace codes & guides →