Lennox Furnace E228 Error Code
What the E228 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E228 means an inducer calibration issue — the variable-speed inducer could not calibrate, usually because of a vent, drain or pressure hose problem.
Likely causes
- Blocked or restricted vent
- Clogged condensate drain
- Kinked or cracked inducer pressure hose
- Failing inducer motor
How to fix it — step by step
- Clear the outdoor vent and intake terminations
- Check the condensate drain for clogs
- Reset power once to allow a recalibration attempt
- Call a technician if E228 returns, to inspect the hoses and inducer
Parts that commonly fix the E228 code
- inducer motor - Shop at RepairClinic
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.