Rheem Furnace 43 Error Code
What the 43 code means
Ignition pressure switch closed when it should be open on Rheem R801V furnaces with the 7-segment diagnostic display.
Likely causes
- stuck ignition pressure switch
- water or debris in the pressure switch hose
- faulty pressure switch
How to fix it — step by step
- Check the thermostat is set to Heat and calling for heat
- Check the outdoor vent and intake pipes are clear of snow, ice or debris
- On a high-efficiency model, check the condensate drain line and trap are not clogged or frozen
- Turn power off at the furnace switch for 30 seconds, then back on, and try one heat call
- If the code returns, stop resetting and call a licensed HVAC technician
Parts that commonly fix the 43 code
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.