Samsung Washer LE Error Code

What the LE code means

Water leak / low water level detected during the cycle - a natural drain or leak error. This is the older display form related to the newer LC code.

Likely causes

  1. Actual leak from a hose, door seal, filter cap or tub connection
  2. Drain hose end lower than the base of the washer, letting water siphon out
  3. Excess suds from too much or non-HE detergent fooling the level sensor
  4. Faulty water level sensor or its hose clogged / folded
  5. Loose water level sensor connections

How to fix it — step by step

  1. Look for water under and behind the washer and check hose, door seal and filter-cap connections
  2. Make sure the end of the drain hose is not lower than the base of the washer and is not on the floor
  3. Run an empty cycle with no detergent and check whether suds appear; repeat empty cycles until suds are gone
  4. Unplug for 2-3 minutes, restore power and restart the cycle

Parts that commonly fix the LE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →