Bryant Furnace 10.1 Error Code

What the 10.1 code means

L1 polarity fault on Bryant furnaces with a 3-digit status display, such as the 926TC and 912SE. The LED flashes rapidly and the display reads 10.1: the polarity of the incoming 115 V power is reversed, so the control cannot prove flame and the furnace will not run.

Likely causes

  1. Line-voltage hot and neutral reversed at a junction box, outlet or the furnace
  2. Incorrect 24 V transformer phasing on twinned furnaces

How to fix it — step by step

  1. Turn the furnace off at the service switch and leave it off
  2. Note the code for the technician
  3. Do not open junction boxes or swap wires yourself - this is live 115 V wiring
  4. Call an HVAC technician or electrician to correct the polarity

Parts that commonly fix the 10.1 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →