Bryant Furnace 25.1 Error Code
What the 25.1 code means
No program information in the control's microprocessor, on Bryant furnaces with a 3-digit status display such as the 926TC and 912SE. The LED flashes major code 25 while the display reads 25.1, and there is no heating operation until the control is programmed.
Likely causes
- Replacement control board was never programmed
- Program information lost or corrupted in the control
How to fix it — step by step
- Note the code and whether a control board was recently replaced
- Do not attempt to program the control yourself - it needs the dealer service app or a super plug
- Leave the furnace off if it will not run
- Call your Bryant dealer to program the control with the correct program number from the rating plate
Parts that commonly fix the 25.1 code
- control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.