Bryant Furnace 32 Error Code

What the 32 code means

Low-heat pressure, draft safeguard or auxiliary limit switch did not close or reopened, on two-stage Bryant furnaces. It is the low-heat counterpart of code 31 and is checked the same way.

Likely causes

  1. Restricted vent or blocked vent termination
  2. Plugged condensate drain
  3. Disconnected or obstructed pressure tubing
  4. Defective inducer motor
  5. Defective low-heat pressure switch

How to fix it — step by step

  1. Check the outdoor intake and exhaust pipes for snow, ice or debris and clear what you can reach
  2. Check the condensate drain line and trap for a clog
  3. Replace a dirty air filter
  4. Cycle power once at the service switch
  5. If 32 returns, call a technician - vent sizing and pressure switch testing are professional work

Parts that commonly fix the 32 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →