Bryant Furnace 42 Error Code

What the 42 code means

Inducer motor fault on Bryant furnaces with variable-speed inducer motors; on the Bryant 355MAV diagnostic chart it is worded 'inducer outside valid speed range'. The inducer did not reach the required speed or did not start after a call for heat.

Likely causes

  1. Failed inducer motor
  2. Restricted combustion air supply or vent
  3. Loose or damaged inducer motor wiring

How to fix it — step by step

  1. Check the outdoor intake and exhaust pipes for snow, ice or debris and clear what you can reach
  2. Note the code for the technician
  3. Cycle power once at the service switch
  4. If 42 returns, call a technician - a furnace that cannot run its inducer cannot vent combustion gases safely

Parts that commonly fix the 42 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →