Bryant Furnace 14.2 Error Code
What the 14.2 code means
Flame lost on Bryant furnaces with a 3-digit status display, such as the 926TC and 912SE. The LED flashes major code 14 while the display reads 14.2: the flame signal dropped out three times after 70 seconds of heating.
Likely causes
- Incorrect manifold pressure or gas firing rate
- Gas inlet pressure fluctuations
- Flame sensing problem (dirty or failing flame sensor)
How to fix it — step by step
- Check that the air filter is clean and vents are open, since poor airflow can disturb the flame
- Confirm other gas appliances are working normally
- Do not keep resetting the furnace to force it to run
- Call a technician to check gas pressure and the flame sensing circuit
Parts that commonly fix the 14.2 code
- flame sensor - Shop at RepairClinic
- gas valve - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.