Bryant Furnace 23 Error Code
What the 23 code means
Pressure switch did not open. On Bryant furnaces, code 23 means the vent pressure switch was still closed when the control expected it to be open at the start of the cycle, so the furnace will not start a heating cycle.
Likely causes
- Obstructed pressure tubing
- Pressure switch stuck closed
How to fix it — step by step
- Note the code for the technician before resetting anything
- Check the outdoor intake and exhaust terminations for obvious blockage
- Turn power off for one minute and back on for a single retry
- If 23 returns, call a technician - never jumper or bypass a pressure switch
Parts that commonly fix the 23 code
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.